Maintenance and care of flat creasing and creasing tangent machine
Maintenance and care of flat creasing and creasing tangent machine
Date:2024-06-20 15:00:38 Views:278
The flat creasing and creasing tangent machine has a simple structure and is easy to operate, but if it is not properly maintained, it will still cause failures. Therefore, it is necessary to strictly follow the requirements to use, adjust and maintain the machine reasonably to ensure the normal operation of the machine, so as to improve the quality of the product and extend the service life of the machine. 1. Check the various parts of the machine frequently to see if they are intact and without any abnormal phenomenon. When the machine fails or parts are damaged, the fault should be eliminated and replaced in time. 2. If the machine makes abnormal sounds, the cause should be analyzed and eliminated in time, and it can be used again after it is normal. 3. When the machine is pressing and cutting, any metal device or hard object is prohibited from falling into the pressing and cutting working plane, otherwise it will cause fatal damage to the machine. 4. When the machine is working, paper scraps should be cleaned in time to prevent them from entering the sliding guide surface of the machine. When any thin sheet enters the guide surface, it may also cause fatal damage to the machine. 5. When arranging the pressing and cutting layout and correcting the layout, it should be noted that the pressing and cutting load cannot be overloaded, and the balance and symmetry of the sheet and the layout distance should be maintained. The blade of the knife wire to be cut should be sharp, otherwise it will seriously affect the normal movement of the machine. 6. Pay attention to the lubrication of the machine before starting each time. After starting the machine, you should first check whether the safety protection devices of the machine are flexible and reliable to ensure the safe and reliable operation of the machine. 7. The electrical system of the machine should maintain good insulation to prevent moisture and water ingress.
