1. Mother reel end photocell with automatic stop.
2. Full rotary flexo printing module support sport varnishing/cold foil
3. Die cut unit able to work full rotary mode and semi rotary mode.
4. Precision cutting to reduce waste
Feature:
1. Mother reel end photocell with automatic stop.
2. Full rotary flexo printing module support sport varnishing/cold foil
3. Die cut unit able to work full rotary mode and semi rotary mode.
4. Precision cutting to reduce waste
3. Die cut station with servo register control.
4. Internet fault diagnostics .
5. Dual 3”pneumatic rewinder for a max roll diameter of 450mm with independent tension control.(optional )
6. High accuracy re-register system, provide you higher quality and efficiency.
Main Technical Specifications:
|
Max.rotary machine speed |
110m/min |
|
Max.die cutting length |
190.5mm-539.75mm |
|
Max.Intermittent speed |
68m/min |
|
Max.die cutting length |
50-330mm |
|
Max.die cutting area |
330mm×320mm(L×W) |
|
Max. unwinding diameter |
2000meter, (diameter:700mm) |
|
Roll max-width='100%' width |
80mm-330mm |
|
Max.rewinding diameter |
3000m (Diameter:700mm) |
|
Die Cutting Precision |
±0.15mm |
|
Voltage |
AV,380V,50HZ |
|
Magnetic cylinder |
Ntermittent:120 teeth |
Unwind-Max unwind dia.700mm; Air expanding mandrel 3" Web guide-Maxcess Web guide ( Edge position control ) Flat bed die cutting-Eye mark sensor, height of the blade 9.5mm ( with upper blade and the bottom blade ) Rewind-Single rewind, Max unwind dia.700mm; Air expanding mandrel 3" Waste matrix-Max unwind dia.600mm; Air expanding mandrel 3"
1.Unwinder withClosed loop tension control.Electronic web guide with ultrasonic edge guide sensor. 2. FullServo driven with exact web tension control,easy to operate,Minimizes waste. 3.Internet fault diagnostics. 4.This is modular design which can be combined with Flexo station,Flat bed silk screen and hotfoil station and etc. 5.One single pass ,improving the finishing quality,ensuring better results and better productivity for converters. TechnicalParameter:
The double-unit trademark die-cutting and hot stamping machine adopts a synchronous transmission mechanism to realize the synchronous movement of the two molding units. A closed transmission chain is used to drive the gripper row to transfer the paper to two molding units in turn to achieve hot stamping, creasing or die cutting processes.
Bienvenida a nuestra página web. Podría contacto con nosotros en inglés por los siguientes métodos en cualquier momento, le repondríamos antes posible para proporcionar los services adecuados.
Please feel free to leave us a message, We will always pay attention to your inquiry and inquiry.
Copyright ? Ruian Maoyuan Machine Co.,Ltd. All Rights Reserved. 
